Hydroponics Unlimited Blog

We’ve just added four new products from Bio Bizz!  Bio Bizz TopMax, Bio Bizz Alg-A-Mic, Bio Bizz Bio-Grow and Bio Bizz Bio-Bloom.

Bio Bizz TopMaxx - BioBizz TopMax fuels prolific blooming while enhancing the flavor of herbs and vegetables in any garden. TopMax is perfectly suited for soil but can be used in other growing media as well. All BioBizz products are certified organic by the Organic Materials Review Institute (OMRI).

Bio Bizz Alg-A-Mic – Listed by the Organic Materials Review Institute (OMRI), this all-natural energy booster contains concentrated seaweed, trace elements and hormones of vegetable origin, amino acids, and vitamins. Alg-A-Mic can be used as a soil drench or as a foliar feed.

Bio Bizz Bio-Grow - BioBizz Bio-Grow (8-2-6) liquid fertilizer is ideal for promoting lush growth during the vegetative cycle, particularly in soil gardens. Bio-Grow can also be used as a plant tonic during the flowering stage. The natural sugars in Bio-Grow benefit bacteria in the soil while the additional micronutrients and vitamins boost overall plant health. Certified organic by the Organic Materials Review Institute (OMRI).

Bio Bizz Bio-Bloom – BioBizz Bio-Bloom (2-6-3.5) encourages abundant flowering and fruit production by supplying much needed macro- and micronutrients as well as enzymes and amino acids.

Cloning Instructions

- Start by cleaning and sterilizing EVERYTHING (trays/domes/scissors/razor blades).

- Soak rooting medium in R/O (reverse osmosis) water mixed with both of these products:

- Nature’s Solution Compost Tea (1 cup per gallon of R/O water) (Root Soak

- KLN Rooting Hormone (2 teaspoons per gallon of R/O water) & Spray)

- Re-soak rooting medium in above solution every 5-8 days (pour any excess water out of tray).

**The trick is to let the grow medium dry out 5-8 days prior to re-soaking (approximately 75% dry). The clones will try to put out roots to find water

- Squeeze the excess water out of the rooting medium (coco plugs or Grodan blocks) and place the medium in tray.

- Keep PH between 5.4 and 6.4

- Take 8″ long clones and place in a cutting tray submersed in room temperature R/O water (this is the safest way to cut a clone).

- Cut down the 8″ long clone to 4″- 6″ at a 45 degree angle underwater.

- Dip 4″ – 6″ long clone (1/2 inch deep) in one of the following Rooting Hormone.

- Clonex Gel

- Dip & Grow

- Rootech

- Wood’s Rooting Compound

- Place clone 1″ deep in one of the following grow tray medium.

- Coco Plugs

- Oasis Cubes/Wedges

- Grodan Blocks

- Cut all large fan leaves on the clone in half with sterile scissors.

- Spray clones immediately with the same mixture from LINE #2.

**Mist clones with this spray once every three days

- After spraying the clones, spray the humidity dome with the same mixture then place the dome over clones and keep the ventilation holes closed.

- Place clones in a dark or subdued light for 24 hours.

- After 24 hours, open (halfway) ONLY 1 ventilation hole and put a Dual Florescent Light (T-12) or a Single T-5 Light Fixture 1″ – 2″ over the humidity dome.

- Set light timer to 20 hours ON and 4 hours OFF.

- Place Heat Mat under the tray and set thermostat at 77 degrees (always keep clones 74-79 degrees).

- After 5 days, open (halfway) the 2nd ventilation hole.

- After 14 days, open (entire way) both ventilation holes.

- You should have rooted clones ready to transplant in 14-21 days.

- 24 hours prior to transplanting, prop open the humidity dome 1″ – 3″ to let air in to harden the clones off.

Tips for after Cloning

**When taking clones from clone tray, feed roots with 1/4 strength bloom nutrients for the first week (PPM should be 300 – 500 and PH should be 5.3 – 6.3).

Advanced Spraying for Veg – Flower

**All sprays should be mixed with 1 quart R/O water and a wetting agent (such as Coco-Wet, SM-90 or Dutch Master Saturator) to make plant sprays.

First Week of Veg: Spray rooted clones with 3/4 tsp. Canna Rhizotonic and3/4 tsp. Grotek Insta-Green. Spray once per day for 5 days.

Second Week of Veg: Spray plants with 1 tsp. Ful-Power Fulvic (Humic) Acid and 1/4 tsp. Dyna-Gro Foliage-Pro. Spray once every other day for 5 days.

Third Week of Veg: Spray plants with 1/4 tsp. Silicate and 1/4 tsp. Messenger (and 1 drop PH Down). Spray only once this week.

Fourth Week of Veg: Spray plants with 3/4 tsp. Canna Rhizotonic and 1/2 tsp. Spray-n-Grow. Spray only once this week.

**This is a good week to cut clones and trim plants before going into flowering

First Week of Flower: Spray plants with 4 tbsp. Dutch Master Max FX Flower and 3/4 tsp. Canna Rhizotonic. Spray only once this week.

Second Week of Flower: Spray plants with 1/4 tsp. Messenger and 1/2 cup Nature’s Solution Tea. Spray only once this week.

**You should start to see small flowers now. The following will be your last spray.

Third Week of Flower: Spray plants with 1 tsp. Ful-Power Fulvic (Humic) Acid and 1 1/2tsp. Sray-n-Grow. Spray only once this week.

**If you wish to keep spraying plants in the flower stage, use Dutch Master Max FX Flower with a very fine misting spray only. Spray once per week.

1. Keep your air temperature 10 – 15 degrees less at night (except in the clone & seed stage).

2. Flush plants every three weeks with a flush product or water with 1/4 strength nutrients and Cannazym or Hygrozyme.

3. No need to run CO2 when lights are off (nighttime). The plants make their own CO2.

4. If you run CO2, run the temperature at 76 – 80 degrees when the lights are on.

5. CO2 levels should be at 600 – 900 during the Vegetated stage.

6. CO2 levels during the Flower stage should be at 1100 – 1500.

7. First watering should be when the lights first come on (morning).

8. Last watering should be 1-1/2 hours before the lights shut off (most mediums).

9. Change your nutrients every 7-14 days.

10. Always pour your nutrients in your reservoir one at a time so they mix slowly.

11. Always keep an air bubbler and air stone in your reservoir for oxygen.

12. Never water plants when the lights are off unless the plants look like they are wilting from no water (this is very rare).

13. If using R/O water, add Calcium/Magnesium/Iron.

14. Spray your plants 45 minutes before turning lights on (or when the leaves are dry).

15. Spray water temperature should be between 75 – 85 degrees (luke warm).

16. I recommend using Foliar Spray all thru the vegetative stage and once every 5-7 days during

the first 3 weeks of flower.

17. PH is how acidic or how alkaline your water or nutrients are. Hydro = 5.3 – 6.3 , Soil = 6.2 – 7.2

18. The following meters measure your nutrients/food levels. PPM (Parts Per Million) , TDS (Total Dissolved Solids) , EC (Electro Conductivity)

19. I highly recommend Microbial Inoculants like Nature’s Solution Tea or Great White.

20. Store all your nutrients in a cool and dark place.

21. Spray plants for bugs every 7-10 days (spray for spider mites every 3 days) or use an auto sprayer 24/7.

22. If water temperature falls below 63 degrees, add a heater. If water temperature above 76 degrees, add a water chiller.

We just added Emerald Triangle’s Snow Storm Ultra, check it out at http://www.hydroponicsunlimited.com/product/719942.html.

If you like Purple Maxx/Snow Storm, but color is not your primary goal, then Snow Storm Ultra is for you. We isolated the “snow storm” effect and optimized it for maximum results. Absolutely nothing else like it on the market. Does not contain carbohydrates or molasses. Three years of development went into this Humboldt County original. Best of all, this additive works with all your favorite nutrient lines. When used with Gravity, Snow Storm will take your plants beyond anything achievable with fertilizer alone.

We have it in 3 different sizes; 1 Qt – $28.50, 1 Gallon – $85.50, and 2.5 Gallon – $170.95